- DC12V10A power supply with metal casing
- Mulple output (support up to 9 channel cameras)
- Each output has independent PTC fuse and LED indicator
- High voltage protection
- DC12V20A power supply with metal casing
- Support up to 18 channel cameras
- LED light for monitoring the power status
- Key lock prevents unauthorized access
- Each outlet is individually fused and each panel is surge protected
- DC12V5A power supply with metal casing
- Mulple outputs (support up to channel cameras)
- Main power switch with surge protecon
- 2 HD video signals transmission over 1 coxial cable
- Design according to projects with minimum installation volume requirement
- 2CH video in one coaxial cable transmission
- FDM technology is easy for multi-channel signals transmission only in ine coaxial cable withou any delay and interference.
- 4-ways CVI/AHD/TVI HD video camera
- Reducve into 4 HD signals aer decompression
- For HD DVR (TVI/CVI/AHD) or matrix is used
- AHD: 720P/960P/1080P
- CVI: 720P/960P/1080P
- TVI: 720P/1080P
- Compliant with IEEE802.3af 15.4 W
- Isolation: 2.5kV
- Power input: DC44~57V
- Power output: DC12V
- Data & power input port: RJ45 female
- Data output port: RJ45 male
- AC Power Adapter
- Cable length: Approx. 1 m
- New brand
- High quality
- Increase air flow in your server rack or cabinet to extend equipment life
- Standard AC power connection
- Removable 115V plug for use with direct current
- Solid metal frame and sturdy design
- Rack cooling fan
- It is a perfect soluon for make custom power cable
- Great connecon with CCTV camera
- Easier for CCTV system installaon
- Screw Type
- Semi Cropper
- 100% New
- Good Quality
- Unique and quality AHD/CVI/Analog video anti jamming device
- Keep video signal from external electromagnetic signal and electric waves signal
- Aluminum alloy shell, durable and good at heat dissipation
- Lengthen the transmission distance up to 800m
3V CR2 Lithium battery, 850mAh (replaceable).
Minimum 5 year life in normal operating condition. (Based on a weekly testing).
LOW BATTERY INDICATION:
A short acoustic “beep” will sound and LED flash every 48 seconds when the voltage is below 2.85V. In this stage it will continue for minmum 30 days, and can drive the alarm for 4 minutes.
LED flashes every 48 second for normal operation.
Audible indicator min. 85 dB @ 3 meter.
Fire alarm condition is indicated by a series of three successive tones.
A red LED is used to indicate the following conditions:
- Fire alarm condition is indicated by a flash every 0.5 seconds.
- Smoke sense speed up is indicated by a flash every 2 seconds when thesmoke level is at the alarm threshold.
- Normal operation is indicated by a flash every 48 seconds.
- Top opening housing
- Weight: 1kg
- External dimension: 365 x 140 x 115 mm
- Internal dimension: 300 x 102 x 80 mm
- DCOM 4-pairs category 5e cable lay the solid platform needed for a reliable 10/100Mb or 1GB ethernet network
- Indoor use
- Conductor: Bare cooper wire ⌀ 0.56 mm
- Insulation: PE, Nom ⌀ 0.98 mm
- Sheath: PVC or L5ZH
- Outer Diameter: Nom. 6.3mm
- Weight: 40 kg
- Battery 12V7AH
- Cycle use
- Sealed and maintenance free operation
- Non-Spillable construction design.
- Transmission IP camera signal over existing coaxial cable
- Transmission distance max up to 220m
- Passive device, no power required
- Built-in surge protection
- High quality and performance
- Extend HDMI signal to max. 100m through UTP (Cat5E, Cat6)
- Transfer HDMI signal to a feature distance using single LAN cable
- Extend up to 100m
- Support HDMI 1.4V
- Support HDCP protecon
- Support up to resoluon 2048x1140