- Smoke Detector Sensor
- Cable Connection: 12V+, 12V-, NC/NO (selectable), C
- Twin LED for 360 degree view
- Nett Weight:200g
- DC12V10A power supply with metal casing
- Mulple output (support up to 9 channel cameras)
- Each output has independent PTC fuse and LED indicator
- High voltage protection
- DC12V20A power supply with metal casing
- Support up to 18 channel cameras
- LED light for monitoring the power status
- Key lock prevents unauthorized access
- Each outlet is individually fused and each panel is surge protected
- DC12V5A power supply with metal casing
- Mulple outputs (support up to channel cameras)
- Main power switch with surge protecon
- Dimension: 442mm(H) x 600mm(W) x 500mm(D)
- 3 x Power outlet
- Detachable side panels with screw
- Front door with lock
Must own collect.
- 2 HD video signals transmission over 1 coxial cable
- Design according to projects with minimum installation volume requirement
- 2CH video in one coaxial cable transmission
- FDM technology is easy for multi-channel signals transmission only in ine coaxial cable withou any delay and interference.
- 24V PoE splitter, 24VDC output
- Unmanaged operation
- Extended enviromental specification
- Support up to 15.4 W (cable and PSE dependent)
- Full wire speed communication
- 4-ways CVI/AHD/TVI HD video camera
- Reducve into 4 HD signals aer decompression
- For HD DVR (TVI/CVI/AHD) or matrix is used
- AHD: 720P/960P/1080P
- CVI: 720P/960P/1080P
- TVI: 720P/1080P
- Compliant with IEEE802.3af 15.4 W
- Isolation: 2.5kV
- Power input: DC44~57V
- Power output: DC12V
- Data & power input port: RJ45 female
- Data output port: RJ45 male
- AC Power Adapter
- Cable length: Approx. 1 m
- New brand
- High quality
- Increase air flow in your server rack or cabinet to extend equipment life
- Standard AC power connection
- Removable 115V plug for use with direct current
- Solid metal frame and sturdy design
- Rack cooling fan
- External siren horn x 1
- Metal casing (small) x 1
- Strobe light
- Temper switch
- It is a perfect soluon for make custom power cable
- Great connecon with CCTV camera
- Easier for CCTV system installaon
- Unique and quality AHD/CVI/Analog video anti jamming device
- Keep video signal from external electromagnetic signal and electric waves signal
- Aluminum alloy shell, durable and good at heat dissipation
- Lengthen the transmission distance up to 800m
3V CR2 Lithium battery, 850mAh (replaceable).
Minimum 5 year life in normal operating condition. (Based on a weekly testing).
LOW BATTERY INDICATION:
A short acoustic “beep” will sound and LED flash every 48 seconds when the voltage is below 2.85V. In this stage it will continue for minmum 30 days, and can drive the alarm for 4 minutes.
LED flashes every 48 second for normal operation.
Audible indicator min. 85 dB @ 3 meter.
Fire alarm condition is indicated by a series of three successive tones.
A red LED is used to indicate the following conditions:
- Fire alarm condition is indicated by a flash every 0.5 seconds.
- Smoke sense speed up is indicated by a flash every 2 seconds when thesmoke level is at the alarm threshold.
- Normal operation is indicated by a flash every 48 seconds.